I'm using Kiwi Syslog free edition. I'm testing it to see if it does what I need, and I've already run into a snag.
I have to identical 2821 voice routers. They both are configured with the same logging setup.
logging trap debugging
logging facility local2
logging source-interface GigabitEthernet0/0
logging 10.2.100.235
On the syslog setup, I've specified the IP addresses of each router as "inputs"
The syslog messages are coming in as expected, but one of the 2 hosts always shows up as 127.0.0.1 in the hostname field.
I've double checked the source interfaces and they're correct.
Anyone have any idea why this is happening?
Thanks!